Since 12 August 2026, every type of packaging placed on the EU market needs an EU declaration of conformity under Article 39 of Regulation (EU) 2025/40, following the model in Annex VIII and backed by technical documentation under Annex VII. For a filled food can it is signed by the filler or brand owner, who is the “manufacturer” in the regulation’s sense, not by the can maker. The can maker has to supply the information behind it and, according to the Commission, cannot refuse. One declaration covers one packaging type: the can, its end and its label as a single unit, for a given product. It must be available in the language of each country where the product is sold and kept for five years. It is a different document from the food-contact declaration of compliance your supplier already sends, although the two can be combined in one dossier.
Most food companies have been receiving declarations from their can suppliers for years: declarations of compliance for food contact, statements on bisphenols, certificates for the steel. The PPWR adds a document that runs in the opposite direction. The brand owner now issues a declaration, on its own responsibility, that the packaging of its product meets the regulation, and the supplier’s documents become the evidence behind it.
This changes who has to know what. Below: who signs, what one declaration covers, how to fill in the Annex VIII model for a can, what the technical file must contain, and the list of documents to request from your can maker.
Two declarations that are easy to confuse
| EU declaration of conformity | Declaration of compliance for food contact | |
|---|---|---|
| Legal basis | PPWR, Article 39 and Annex VIII | Regulation (EC) No 1935/2004, Article 16(1); for coatings and other materials made with bisphenols, Article 8 and Annex III of Regulation (EU) 2024/3190 |
| What it confirms | That the packaging meets the PPWR sustainability and labelling requirements in Articles 5 to 12: substances, recyclability, minimisation, labelling | That the food-contact material complies with the food-contact rules that apply to it, such as migration limits and the bisphenol restrictions |
| Who issues it | The manufacturer of the packaging, normally the filler or brand owner | Each business operator at each marketing stage before retail: the coating supplier to the can maker, the can maker to the filler |
| Who it is for | Market surveillance authorities, on request | The next business in the supply chain; it travels with the material |
| How long it is kept | 5 years for single-use packaging, together with the technical documentation | Supporting documentation must be available to authorities on demand |
The regulation allows one combined document. Article 39(3) provides that where packaging or a packaged product is subject to several Union acts requiring a declaration of conformity, a single declaration may be drawn up, naming each act, and it may consist of a dossier of the individual declarations. The Commission’s FAQ adds that a combined declaration must keep the packaging and the packaged product clearly apart. For a canned food line, a practical structure is the PPWR declaration on top, with the can maker’s food-contact declaration of compliance attached as part of the dossier.
Who signs: the manufacturer, which is usually you
Article 39(1) defines what the declaration says:
“The EU declaration of conformity shall state that the fulfilment of the requirements laid down in or pursuant to Articles 5 to 12 has been demonstrated.”
And Article 15(2) puts it on the manufacturer. The Commission’s guidance notice C/2026/3084 explains who that is: the owner of the name or trademark on the packaging is presumed to be the manufacturer, there is only one manufacturer in a supply chain, and for sales packaging it is normally the filler, who is often also the brand owner. For a can of tomatoes sold under your brand, the manufacturer is you. For private label, it is the retailer or brand whose name is on the label.
The exception: if the brand owner is a micro-enterprise and the can maker is in the same member state, the can maker is the manufacturer and signs.
Three points from the Commission’s FAQ on delegation:
- The conformity assessment may be carried out on your behalf, for example by a laboratory or a certification scheme.
- The declaration may be drafted by an authorised representative appointed by written mandate, but responsibility stays with the manufacturer.
- The technical documentation cannot be delegated. The manufacturer has to draw it up.
The can maker’s role is set by Article 16(1):
“Suppliers shall provide the manufacturer with all the information and documentation necessary for the manufacturer to demonstrate the conformity of the packaging and the packaging materials with this Regulation, including the technical documentation referred to in Annex VII and required under or pursuant to Articles 5 to 11, in one or more languages which can be easily understood by the manufacturer.”
The FAQ is direct about it: suppliers “can therefore not refuse to provide the relevant documentation to the manufacturer”. In general they are not responsible for drawing up a declaration of conformity themselves.
What one declaration covers
Annex VII requires a written declaration “for each packaging type”. The Commission’s FAQ explains that “type” here means each packaging format or batch or series, not the packaging material, and gives three rules that translate directly to cans.
The whole packaging unit. The assessment and the declaration cover the complete unit: for a can, the body, the end or ends, the label or print, and any overcap. One declaration for the unit is enough, but it should describe each component.
Different sizes of the same product. If the same product goes into cans of different sizes and the size makes no difference to any requirement in Articles 5 to 12, one declaration can cover all the sizes.
Different products. If the products differ, one declaration should not cover all your packaging. Minimisation in particular is assessed against the packaged product, so a 73 × 110 can of peas and the same can holding fish in oil are two types.
A workable rule for a canned food portfolio is one declaration per combination of can specification and product family, with the sizes listed inside it where nothing else changes.
| Situation | One declaration or several? |
|---|---|
| Sweetcorn in 212 ml, 425 ml and 850 ml cans, same substrate, coating and end type | One, listing the three sizes |
| The same 425 ml can used for sweetcorn and for chickpeas | Two, one per product |
| The same product moved from a lacquered tinplate end to an aluminium peel-off end | The declaration must be updated: the unit has changed |
| Tuna can switched to a new internal lacquer | Re-assessment and update, because the substance evidence changes |
| Same can, new label design, same materials | Usually no change to the declaration, but check the label materials |
The Annex VIII model, filled in for a food can
Annex VIII gives the structure: a declaration number, eight numbered points and a signature block.
| Annex VIII point | What it asks for | What to enter for a canned product |
|---|---|---|
| Declaration number | Identification number of the declaration | Your internal reference, for example a code per packaging type and version |
| 1 | Unique identification of the packaging | The packaging type code linking the can specification, the end specification and the product; the FAQ says the identification is by type, batch or serial number |
| 2 | Name and address of the manufacturer and, where applicable, the authorised representative | Your legal entity and the same postal address as on the label |
| 3 | Statement that the declaration is issued under the sole responsibility of the manufacturer | Fixed wording from Annex VIII |
| 4 | Object of the declaration, with identification allowing traceability, and a description of the packaging | Can format and dimensions, substrate (tinplate, ECCS or aluminium), internal and external coatings, end type, label material, product, and the batch coding scheme |
| 5 | Conformity with the relevant Union legislation | Regulation (EU) 2025/40; if you combine declarations, also Regulation (EC) No 1935/2004 and Regulation (EU) 2024/3190, with their publication references |
| 6 | Harmonised standards, common specifications or other technical specifications used | For example EN 13428:2004 for minimisation and substances of concern, EN 13430:2004 for material recycling, CR 13695-1:2000 for the four heavy metals |
| 7 | Notified body, where applicable | Not applicable: the PPWR procedure is internal production control (Module A), without a notified body |
| 8 | Additional information | For example the PFAS evidence basis, the passivation type of the steel, and a note that the recyclability grade will be added once the PPWR delegated act applies |
| Signature | Place and date of issue, name, function, signature | A person with authority for product compliance |
On point 6, note the Commission’s position in the FAQ: under the PPWR the old harmonised standards no longer create a presumption of conformity and can be used only as guidance. The one exception is minimisation, where the related standard keeps its presumption until the end of 2029. Citing them is still useful, because they show the authority what method you followed.
What the technical documentation must contain
The declaration rests on the technical file in Annex VII. Its minimum content, and what it means for a can:
| Annex VII, point 2 | For a food can |
|---|---|
| (a) General description of the packaging and its intended use | Format, capacity, product, filling and sterilisation conditions |
| (b) Conceptual design, manufacturing drawings and materials of components | Can and end drawings from the can maker; material specifications of substrate, coatings, compound and label |
| (c) Descriptions needed to understand the drawings | Usually covered by the supplier’s specification sheets |
| (d) Standards and specifications applied, and which parts | The list you cite in point 6 of the declaration |
| (e) How the assessments under Articles 6, 10 and 11 were carried out | Recyclability against the old criteria for now; minimisation; reuse is not relevant to single-use cans |
| (f) Test reports | Heavy metals, total fluorine or PFAS, and any other tests the evidence relies on |
The file must also include an “adequate analysis and assessment of the risks of non-conformity”. For a can this is short in practice: which components could carry heavy metals or fluorine, how that is controlled, and what happens when a supplier changes a material.
Articles 5(6) and 6(9) say that compliance with the heavy-metals and PFAS limits, and later with the recyclability requirements, is demonstrated in this file. If an authority asks, you have 10 days to provide it (Article 15(10)), in a language it can easily understand.
What to request from your can maker
The documents below give you everything the declaration and the technical file need. Ask for them per can and end specification you buy.
| Document | What it should cover | Used for |
|---|---|---|
| Can and end drawings with dimensions | Each specification you buy | Annex VII (b) |
| Material specification | Substrate grade and coating weight; internal and external coating systems; end compound; inks and varnishes | Annex VII (b); declaration point 4 |
| Heavy-metals statement | Sum of lead, cadmium, mercury and hexavalent chromium ≤ 100 mg/kg for the complete can and end, with method and passivation type | Article 5(4); declaration point 6 |
| PFAS statement | Internal lacquer, external varnish and inks, compound, lubricants; total fluorine per component | Article 5(5) |
| Declaration of compliance for food contact | Regulation (EC) No 1935/2004; Regulation (EU) 2024/3190 for coatings | Combined dossier; food-contact compliance |
| Recyclability statement | Against EN 13430:2004 for now, and a commitment to provide the PPWR grade once the delegated act applies | Article 6; Annex VII (e) |
| Identification scheme | Batch or type code, where it is printed or embossed, and how it links to production records | Article 15(5); declaration point 1 |
| Change notification commitment | Advance notice of any change to substrate, passivation, coating, compound or end supplier | Article 15(4) re-assessment |
| Response time for authority requests | A named contact and a turnaround shorter than 10 days | Article 15(10) |
A short request text you can adapt:
Under Article 16(1) of Regulation (EU) 2025/40, please provide, for each can and end specification listed below, the information and documentation we need to draw up our technical documentation and EU declaration of conformity: drawings and material specifications; a heavy-metals statement under Article 5(4) with the measurement basis and the passivation type of the steel; a PFAS statement under Article 5(5) covering coatings, compound, inks and lubricants, with total fluorine results; your declaration of compliance under Regulation (EC) No 1935/2004 and Regulation (EU) 2024/3190; a recyclability statement against EN 13430:2004; and a description of the batch identification. Please also confirm that you will notify us in advance of any change to these materials.
Keeping the declaration current
Article 39(2) requires the declaration to be “continuously updated”. Article 15(4) requires a re-assessment when the packaging design or characteristics change, or when the standards or specifications you relied on change. For cans the typical triggers are:
- a new internal lacquer or end compound;
- the steel mill moving from chromium-based to chromium-free passivation;
- a new can or end supplier, or a second source;
- a change from a lacquered tinplate end to an aluminium or peel-off end;
- the PPWR design-for-recycling criteria entering into application.
Keep each version. The five-year retention period runs from the date each batch of packaging was placed on the market, so a superseded declaration is still needed for the products sold under it.
Language, stock and enforcement
Language. The declaration must be drawn up in, or translated into, the language required by each member state where the packaging is placed or made available on the market (Article 39(2)). For a product sold in Germany, Italy and Latvia that means German, Italian and Latvian versions, or the languages those countries accept.
Packaging made before 12 August 2026. Where the information for older packaging is missing, for example because the supplier no longer exists, the FAQ asks the manufacturer to make “best efforts”: request the data from the former supplier or its successor, or make its own assessment.
Enforcement. In the first months, the Commission expects authorities to warn first and give time to correct, before any withdrawal. In Germany, fines for breaches of directly applicable PPWR obligations start from 12 February 2027 under the transitional rules of the new packaging law.
Frequently asked questions
Does the can maker issue the PPWR declaration of conformity?
Normally not. The declaration is issued by the manufacturer, which for a filled can is the filler or brand owner. The can maker must supply the information and documentation needed. It becomes the manufacturer only if the brand owner is a micro-enterprise in the same member state.
Is the PPWR declaration the same as the declaration of compliance for food contact?
No. The declaration of compliance under Regulation (EC) No 1935/2004 confirms food-contact safety and is issued by each supplier in the chain. The PPWR declaration confirms the packaging sustainability requirements and is issued by the manufacturer. They can be combined in one dossier.
Can one declaration cover several can sizes?
Yes, if they hold the same product and the size does not change compliance with any requirement in Articles 5 to 12. Different products need separate declarations.
Which standards can be cited in the declaration?
For example EN 13428:2004, EN 13430:2004 and CR 13695-1:2000. Under the PPWR they serve as guidance rather than a presumption of conformity, except the minimisation standard, which keeps its presumption until the end of 2029.
In which language must the declaration be?
In the language required by each member state where the packaging is placed or made available on the market.
How long must it be kept, and how fast must it be produced?
Five years for single-use packaging, together with the technical documentation. On a reasoned request from a national authority it must be provided within 10 days.
Sources and primary references
- Regulation (EU) 2025/40 on packaging and packaging waste (PPWR): Articles 3(1)(13), 5, 6, 15, 16, 17, 38 and 39; Annexes VII and VIII
- Commission Notice C/2026/3084, guidance on the application of the PPWR, point 2 (definition of manufacturer)
- European Commission: PPWR Frequently Asked Questions, 2nd edition, 3 August 2026, sections on obligations of suppliers and on conformity assessment
- Regulation (EC) No 1935/2004 on food contact materials, Article 16
- Regulation (EU) 2024/3190 on bisphenols in food contact materials, Article 8 and Annex III
- Related: PPWR in force: what metal food packaging must meet since 12 August 2026
A note on the quotations. Passages from Regulation (EU) 2025/40 are reproduced from the official language version of the regulation, so the wording in each language edition of this article is the wording published in the Official Journal. The FAQ is published in English only; passages from it are translated. In the Russian edition all quotations are an unofficial translation, because the European Union does not issue Russian-language versions of its acts, and the English original governs. The request text above is a suggested wording, not an official form.
This article is general guidance, not legal advice. Who counts as the manufacturer and what one declaration may cover depend on the facts of each product and supply chain.
