EPR Fees on Metal Packaging in 2027: Germany, Italy, Spain and Latvia Compared

Extended producer responsibility fees remain national under the PPWR. The regulation harmonises registration, reporting and, later, the criteria for eco-modulation, but not the fees themselves. For 2027 the picture for steel and aluminium packaging is this. In Italy, the CONAI contribution is EUR 5 per tonne for steel and EUR 12 per tonne for aluminium in 2026, and CONAI’s July 2026 announcement of changes for 2027 did not touch either material. In Spain, the 2027 price list Ecoembes published in July 2026 sets EUR 0.197 per kg for steel and EUR 0.040 per kg for aluminium for household packaging, the same as in 2026. In Latvia, the statutory natural resources tax on metal packaging is EUR 1.10 per kg; companies placing 300 kg or more of packaging a year must join a producer responsibility scheme instead, whose fees are set by contract. In Germany, dual-system fees are negotiated and not published; the new packaging law in force since 12 August 2026 gives the government a legal basis to regulate eco-modulated fees. The EU-wide eco-modulation framework starts only 18 months after acts due by 2028 and 2030.


EPR fees on metal cans are small next to the price of the can, and that is why they are easy to get wrong. They are calculated on declared weight, collected by different bodies in each country, charged at different points in the supply chain, and expressed in euro per kilogram in one country and euro per tonne in the next. A 2027 budget built on last year’s invoice in one market says little about the next.

This article sets out, for Germany, Italy, Spain and Latvia, who pays, on what basis and at what rate in 2027, and what changes when the PPWR eco-modulation arrives.


What the PPWR harmonises, and what it leaves national

According to the Commission’s PPWR FAQ, the regulation harmonises three things in producer responsibility:

  • Registration and reporting. Every member state must run a register of producers (Article 44) and accept the same registration data and reporting format. The format is set by a Commission implementing act that was due by February 2026; member states then have 18 months to set up their registers. The FAQ expects the first reports under the harmonised rules by 1 June 2030.
  • Who the producer is. The producer is the manufacturer, importer or distributor who first makes the packaging, or the packaged product, available on the territory of a member state. For canned food sold to consumers, that is normally the brand owner in its home market and the importer or first distributor in each export market.
  • The criteria for eco-modulation. Fees will be modulated by the recyclability performance grade of the packaging, under a framework the Commission adopts with the design-for-recycling rules.

Everything else stays national: the fee levels, the collecting bodies, and how many producer responsibility organisations a country allows. Until the EU framework applies, the FAQ confirms that member states can keep modulating fees under their own rules.

When EU eco-modulation actually starts

Article 6(8) of the PPWR ties harmonised fee modulation to two sets of acts:

Act Due by Article
Design-for-recycling criteria and recyclability grades, including the framework for modulating EPR fees 1 January 2028 Art. 6(4)
Methodology for “recycled at scale” 1 January 2030 Art. 6(5)
Fees modulated by recyclability grade 18 months after both have entered into force Art. 6(8)

If the Commission adopts both sets of acts on their deadlines, harmonised modulation would start around mid-2031; earlier adoption would bring it forward. National modulation continues in the meantime.


Why the same can costs different amounts in different countries

The fee base is always the weight of the packaging. The rate, and the point where it is charged, differ:

Germany Italy Spain Latvia
Who collects Dual systems (producer responsibility organisations), registration with the ZSVR CONAI, through the material consortia (RICREA for steel, CIAL for aluminium) Ecoembes for household packaging Producer responsibility organisations; the State Revenue Service for the tax
Who pays The producer placing filled household packaging on the German market Charged on the first transfer of the finished empty packaging, from the can maker to the filler; importers of packaged goods declare it themselves The company placing household packaged products on the Spanish market The person who first sells goods in packaging in Latvia
Steel, 2027 Contractual, not published EUR 5 per tonne (2026 rate, not changed for 2027) EUR 0.197 per kg EUR 1.10 per kg tax, or the scheme’s contractual fee
Aluminium, 2027 Contractual, not published EUR 12 per tonne (2026 rate, not changed for 2027) EUR 0.040 per kg EUR 1.10 per kg tax, or the scheme’s contractual fee

To show the scale, take an illustrative steel food can weighing 50 g with its ends. In Italy the CONAI contribution on it is about EUR 0.00025. In Spain the Ecoembes fee is about EUR 0.0099. In Latvia, a company outside a producer responsibility scheme would pay EUR 0.055 in natural resources tax, or double that if it is obliged to join a scheme and has not. These are not like-for-like prices: the schemes cover different costs and different scopes. They do show why the weight of each can and end, and where it is declared, matters to the budget.


Germany: the VerpackDG and contractual fees

The Act adapting packaging law to Regulation (EU) 2025/40 (VerpackDG) was published in the Federal Law Gazette on 17 July 2026 and replaced the Packaging Act (VerpackG) on 12 August 2026, the day the PPWR became applicable. For metal food packaging sold to consumers, the system does not change in substance:

  • Producers of packaging that ends up in households must register with the Central Agency Packaging Register (ZSVR) in the LUCID database and must join a dual system before placing packaging on the market.
  • Dual systems agree participation fees by contract with each producer. There is no common published tariff, although some systems offer online prices for small quantities. Tinplate and aluminium are reported under the material categories for ferrous metals and aluminium.
  • The old obligation for systems to set fees that reward recyclable packaging continues as § 26, and the new § 26a obliges the Federal Environment Ministry, together with the Economy Ministry, to issue ordinances on the ecological design of participation fees based on recyclability and the use of recycled material. The Federal Environment Ministry’s summary of the law describes this. The ordinance itself was still to come when the law entered into force: the Bundestag and Bundesrat asked the government to present it as soon as possible, Kunz Rechtsanwälte notes.
  • Existing systems must meet the new authorisation requirements by 1 January 2027, and fines for breaches of directly applicable PPWR obligations start from 12 February 2027, according to the transitional provisions summarised by Gleiss Lutz.

For a 2027 budget, the German figure comes from your own system contract. Ask your dual system for its 2027 price for ferrous metals and aluminium, and whether it plans fee modulation for 2027 before any ordinance under § 26a.


Italy: CONAI rates unchanged for metals

Italy runs a single national system. The CONAI environmental contribution (CAC) is charged per tonne of packaging. In 2026 it is EUR 5 per tonne for steel and EUR 12 per tonne for aluminium, unchanged at both the 1 January and the 1 July 2026 updates, according to the 2026 CONAI guideline as summarised by PQA and BDO’s EPR newsletter of June 2026.

In July 2026 CONAI announced its changes for 1 January 2027, reported by Prometeo Rifiuti on 7 July: wood from EUR 10 to EUR 12 per tonne, glass from EUR 40 to EUR 48 per tonne, and the flat rate on the tare weight of imported packaged goods from EUR 131 to EUR 132 per tonne. Steel and aluminium were not among the changes. A separate surcharge concerns capsules and pods for coffee and tea, which count as packaging from 12 August 2026: for aluminium capsules, EUR 108 per tonne is added to the base rate from October 2026, according to BDO’s April 2026 newsletter. It does not apply to cans.

How the contribution reaches you depends on where your cans come from. Under the CONAI guide, it is charged at the “first transfer” of the finished empty packaging in Italy: the can maker shows it on its invoice to the filler, and the filler pays it with the can price. A company that imports cans, or imports canned food into Italy, declares and pays the contribution itself, on the weight of the packaging or through the simplified flat-rate procedures for packaged goods.

Italian plastics and paper are modulated by contribution bands. Steel and aluminium carry a single rate each, reflecting their established recycling chains.


Spain: Ecoembes 2027 prices unchanged from 2026

In Spain, household packaging is covered by Ecoembes under Royal Decree 1055/2022 on packaging and packaging waste. Ecoembes published its 2027 price list in July 2026, as it did with the 2026 list a year earlier. For household packaging it sets EUR 0.197 per kg for steel and EUR 0.040 per kg for aluminium, for beverage cans and other packaging alike. Both rates are the same as in 2026. In 2025 they were higher: EUR 0.218 per kg for steel beverage cans and EUR 0.200 for other steel packaging, EUR 0.060 and EUR 0.042 for aluminium.

The fee is paid by the company that places packaged products on the Spanish household market, on the declared weight of each packaging material. Ecoembes also publishes an eco-modulation guide for 2027 setting out bonuses and penalties by design criteria. Commercial and industrial packaging, such as transport packaging, falls under separate producer responsibility schemes.

For a German or other foreign producer exporting to Spain, the obligation sits with whoever first makes the packaged product available on the Spanish market: usually the Spanish importer, distributor or retailer. A foreign producer is the payer itself mainly when it sells directly to end users in Spain, and it then needs an authorised representative for EPR there.


Latvia: a tax, a scheme, and no register yet

Latvia combines a tax with producer responsibility. Under Annex 7 to the Natural Resources Tax Law, the tax on packaging made of metal is EUR 1.10 per kg, a rate in force since 1 January 2024 and unchanged in the consolidated text after the amendments that took effect on 15 July 2026. The taxpayer is the person who first sells goods in packaging in Latvia, which includes importers.

The tax is the default, not the usual payment. A company is exempt if it takes part in a producer responsibility system for packaging (Article 8 of the law). According to the State Environmental Service:

  • companies placing 300 kg or more of packaging on the market a year must join such a system;
  • below 300 kg, joining is optional, but packaging must be recorded and the tax declared and paid;
  • a company obliged to join that does not pays the tax at double the rate.

Scheme fees are set by contract with each producer responsibility organisation, so the 2027 figure has to come from your own scheme, in writing. Beverage cans in the deposit system are handled separately by the deposit system operator.

On the PPWR side, the State Environmental Service confirms that Latvia does not yet have a separate packaging producer register and does not issue EPR or PPWR registration numbers. Registration happens through the producer responsibility systems until amendments to the Packaging Law, which are being prepared, introduce the register required by Article 44.


What to collect for the 2027 budget

From your can supplier:

  1. The certified unit weight of each can body, end and label per specification. The fee base in every country is weight, and estimated weights cause the most frequent EPR declaration errors.
  2. Material split per component: tinplate or ECCS, aluminium, plastic overcap, paper label.
  3. In Italy, confirmation that the CONAI contribution is shown on the invoice and at which rate.
  4. A recyclability statement now, and a commitment to provide the PPWR recyclability grade once it exists, because that grade will drive fee modulation.

From your producer responsibility organisation or dual system:

  1. The 2027 rate for ferrous metals and aluminium, in writing.
  2. Any bonus or penalty that applies to your formats in 2027.
  3. The reporting deadlines for 2027 data and, in Latvia, the status of the new register.

For finance:

  1. Map each SKU to the country where it is first placed on the market, since that decides who pays.
  2. Separate household from commercial packaging, because different schemes and rates apply.
  3. Budget Spain at the 2027 rate, Italy and Latvia at unchanged rates unless your scheme says otherwise, and Germany from the system contract.

Frequently asked questions

What is the CONAI contribution for steel and aluminium packaging in 2027?
The 2026 rates are EUR 5 per tonne for steel and EUR 12 per tonne for aluminium. CONAI’s July 2026 announcement of changes from 1 January 2027 concerned wood, glass and the import flat rate, not steel or aluminium.

How much does EPR cost in Spain in 2027 for metal packaging?
EUR 0.197 per kg for steel and EUR 0.040 per kg for aluminium in household packaging, according to Ecoembes’ 2027 price list; the rates are unchanged from 2026. The fee is paid by the company placing the packaged product on the Spanish market.

What is the natural resources tax on metal packaging in Latvia?
EUR 1.10 per kg under Annex 7 to the Natural Resources Tax Law. Companies in a producer responsibility system are exempt; those placing 300 kg or more of packaging a year must join one.

Are German EPR fees for tinplate published?
No. Dual systems set participation fees by contract. The VerpackDG, in force since 12 August 2026, provides a legal basis for ordinances on eco-modulated fees.

When will EPR fees be modulated by PPWR recyclability grades?
Under Article 6(8), 18 months after the design-for-recycling delegated acts (due by 1 January 2028) and the recycled-at-scale implementing acts (due by 1 January 2030) have entered into force. Until then national modulation rules apply.

Who pays EPR when canned food is exported to another EU country?
The producer in each country is the company that first makes the packaged product available there: usually the importer or distributor, or the brand owner if it sells directly to end users in that country.


Sources and primary references

About the figures. Rates are those published or reported by the bodies named, as of October 2026. The per-can examples use an illustrative weight of 50 g, not a specific product. German fees are contractual and are not shown. Check each rate with your scheme before budgeting: schemes can change rates during the year.

This article is general guidance, not legal or tax advice.

Request Basket
Hello! How can we help you?