PPWR Compliance for Metal Food Packaging: An 11-Week Countdown to 12 August 2026

The Packaging and Packaging Waste Regulation — Regulation (EU) 2025/40 — entered into force on 11 February 2025. Its core obligations generally apply from 12 August 2026. As of today, food producers using metal cans, easy-open ends, bottom ends and tinplate substrates have eleven working weeks to confirm that their packaging — and their packaging suppliers — are ready. 12 August 2026 has now passed: what applies since then and what comes next is set out in PPWR in Force: What Metal Food Packaging Must Meet Since 12 August 2026, and What Comes Next.

This is not another high-level overview of PPWR. Food producers do not need to be told the regulation exists. They need a working plan for the next seventy-seven days: which supplier conversations to have, which documents to collect, which audit gaps to close, and which formats to re-examine. What follows is that plan, written for the people who will personally answer to a Q4 2026 customer audit, a QA finding, or an EPR fee escalation.


What changes for metal food packaging on 12 August 2026

PPWR’s general application date triggers a layered set of obligations. Not every requirement bites on day one — several phase in across 2027–2030 — but the framework, the supplier accountability, and the procurement-side documentation pressure are all live from August. The European Commission’s packaging and packaging waste overview is the authoritative reference for the framework as a whole.

For metal food packaging specifically, the operating requirements that matter immediately are the following.

Design for recycling

Recyclability performance grades will be defined in delegated acts published progressively. But procurement teams are already being asked by retailer customers to evidence the recyclability claim today. For metal cans, this is structurally easier than for multi-material formats — but evidence has to exist on paper, not in talking points. Industry reference schemes for assessment include RecyClass, the harmonised European standards under CEN, and member-state recyclability frameworks.

Recycled-content thresholds

Mandatory recycled-content thresholds under PPWR apply to plastic packaging from 2030, with separate phase-in schedules. For metal substrates, recycled content is not subject to a mandatory PPWR threshold in the same way — but procurement teams are increasingly required to report recycled-content data to fulfil customer ESG commitments and to qualify for favourable EPR fee modulation. According to Metal Packaging Europe, steel packaging in the EU achieved an overall recycling rate above 80% in recent years, and tinplate from European mills routinely incorporates substantial recycled scrap. The specific number for your substrate must be obtainable from the supplier on request, with the data year stated.

Empty space and overpackaging

From 1 January 2030, or three years after the Commission’s implementing act on the calculation method (due by 12 February 2028) enters into force, whichever is later, PPWR caps the empty-space ratio at 50% for grouped, transport and e-commerce packaging (Article 24(1)). For primary cans this is rarely a binding constraint, but secondary packaging — trays, shrink wrap, palletisation patterns — needs review.

EPR fee modulation

PPWR will require EPR fees to be modulated by recyclability grade, but only 18 months after both the design-for-recycling delegated acts (due by 1 January 2028) and the implementing acts on the recycled-at-scale methodology (due by 1 January 2030) have entered into force (Article 6(8)). Until then, member states modulate fees under their own national rules, and some schemes, such as France’s Citeo, already charge more for less recyclable packaging. A can supplier who cannot produce a defensible recyclability statement is a fee risk in those schemes now, and under the PPWR grades later. For EPR fees in 2027 by country, see EPR Fees on Metal Packaging in 2027: Germany, Italy, Spain and Latvia Compared.

Labelling and consumer-facing harmonisation

Pictograms and material identification on consumer packaging are being harmonised. Some member-state schemes — the French Triman label, for example — already require specific labelling. PPWR consolidates the framework and prepares ground for further changes through subsequent delegated acts.

Heavy metals

The limit from Directive 94/62/EC — lead, cadmium, mercury and hexavalent chromium, total under 100 ppm (100 mg/kg) — carries over unchanged into Article 5(4) of the PPWR, and the Directive itself is repealed from 12 August 2026. Suppliers should provide a current declaration, dated within the last twelve months.

Substances of concern

PPWR introduces stricter management of substances of concern in packaging materials. This intersects with REACH (Regulation (EC) No 1907/2006) and with the bisphenols regulation — Regulation (EU) 2024/3190, already in force since January 2025 — on can interior coatings.

The practical implication for procurement: by 12 August, every metal-packaging supplier you rely on should be able to deliver a structured documentation package addressing each of these areas, with named owners, refresh dates, and at minimum a documented good-faith roadmap for items still in transition.


The eleven-week plan

The plan below assumes a Tuesday 27 May start and a 12 August target. Working backwards: seventy-seven calendar days, roughly fifty-five working days, organised into four sprints.

Weeks 1–3 (27 May – 14 June): supplier inventory and document request

  • List every metal-packaging supplier currently in use, including secondary and dormant ones. Any supplier from whom you bought even a trial quantity in the last twenty-four months counts.
  • Per supplier, identify the named QA, technical, and commercial contact.
  • Send a structured PPWR documentation request to each, using a single common template, with a response deadline of 24 June.
  • Open an internal tracking sheet: supplier, contact, request sent, response received, document completeness, gaps.

The single common template matters. If every supplier replies in a different format, your QA team will spend July reconciling spreadsheets instead of reviewing gaps.

Weeks 4–6 (15 June – 5 July): gap analysis and supplier escalation

  • Map each supplier’s response against the seven obligation areas above.
  • Categorise each gap as: present and complete / present but outdated / commitment but not yet delivered / silent.
  • For silent gaps, escalate to the supplier’s commercial lead with a fourteen-day response deadline.
  • For outdated gaps, request a refresh with a clear date and a statement of methodology — especially for recyclability and recycled-content claims.
  • Flag suppliers who cannot respond at all. These are not necessarily disqualified — some smaller suppliers simply lack the QA capacity to respond on the timetable. But they are a supplier-risk concentration that procurement leadership needs to see.

Weeks 7–9 (6 July – 26 July): format and SKU-level review

  • For each SKU in production, confirm that the can / EOE / tinplate / coating combination has a current declaration covering all PPWR-relevant areas.
  • Pay particular attention to: BPA-free coating status, recycled-content statement, recyclability grade evidence, heavy-metals declaration date.
  • Where a SKU relies on a supplier with material documentation gaps, decide: re-source, sample an alternative, or accept the risk with documented mitigation — a written supplier remediation plan with a credible date.
  • Begin sampling alternatives where the second-source supplier conversation has not yet started. Eleven weeks is enough time to receive samples and validate fit on most format combinations.

Weeks 10–11 (27 July – 12 August): audit-ready file assembly

  • Consolidate all supplier documentation into a single PPWR file per SKU.
  • Confirm internal audit owner.
  • Brief the customer-facing team — sales, key accounts, customer service — on what is documented and what is in remediation, so external questions are answered consistently.
  • Run an internal table-top review against the most likely customer-audit questions for Q4 2026. Treat any gaps surfaced here as new sprint items for August and September, with named owners.

Most food producers will have started before 27 May and will be further along. The point of the countdown is to flag what cannot wait: documentation requests must be out the door before mid-June if responses are to be reviewed in time to act on gaps.


The seven questions to ask every supplier before August

If you write one supplier email this quarter, this is its content.

  1. Can you provide a current declaration of conformity for the food-contact coating system, citing Regulation (EC) No 1935/2004 and Regulation (EU) 2024/3190 on bisphenols, with the issue date?
  2. What is the recyclability grade or assessment you can document for the can / EOE / tinplate format we currently purchase, and which methodology was used?
  3. What recycled-content percentage do you document for the substrate (steel or aluminum), in which data year, and from which mill source?
  4. Can you provide a current heavy-metals compliance declaration under Article 5(4) of the PPWR (formerly Directive 94/62/EC) — lead, cadmium, mercury, hexavalent chromium, total under 100 ppm — dated within the last twelve months?
  5. What is your PPWR-readiness statement, and what items in your transition roadmap are not yet complete? Name the items and the planned completion dates.
  6. What backup-supply commitment can you document in the event of disruption at your primary production site?
  7. Who is the named QA or regulatory contact at your organisation that our QA team can speak with directly between now and the end of August?

Suppliers who answer all seven with full and current documentation are PPWR-ready as a supplier relationship. Suppliers who answer four or five with documentation and the rest with credible remediation timelines are workable but flagged. Suppliers who answer fewer than four — or who decline to put answers in writing — are the supplier-risk concentration this exercise was designed to surface.


What good documentation looks like

Procurement-side teams often receive supplier responses that are partial, branded as marketing material rather than QA documentation, or written in a way that does not stand up to a customer audit. The objective is a structured set of artefacts that a Q4 auditor can read in one sitting.

A complete metal-packaging supplier documentation pack for PPWR contains, at minimum:

  • Company QA profile — site addresses, applicable certifications (BRCGS Packaging Materials, FSSC 22000, IFS PACsecure, ISO 9001, ISO 14001 where held), and the source-of-truth status (manufacturer, converter, or authorised distributor).
  • Food contact materials framework statement — covering Regulation (EC) No 1935/2004, Regulation (EC) No 2023/2006 on good manufacturing practice, and applicable specific measures including Regulation (EU) No 10/2011 by analogy for internal coatings and Regulation (EU) 2024/3190 on bisphenols.
  • Per-format declarations of compliance — for each can format, EOE, bottom end and substrate combination you actually purchase. Generic group-level declarations are not adequate when specific format properties differ.
  • Migration testing summary — referencing EN 1186 and EN 13130 methodologies, with the test date and the conditions of use applied.
  • Heavy metals declaration — Article 5(4) PPWR (formerly Directive 94/62/EC), dated within twelve months.
  • REACH statement — Regulation (EC) No 1907/2006, Annex XVII and the SVHC list referenced.
  • Recyclability statement — methodology cited, ideally referencing CEN, RecyClass, or member-state recyclability assessment schemes as applicable to metal substrates.
  • Recycled-content statement — substrate type, percentage, data year, mill source, methodology.
  • PPWR readiness statement — what is in place today, what is in transition, named timelines.
  • Logistics and delivery model — Incoterms used, typical lead time per format, secondary packaging used for transport.
  • Sample request process — SLA, what is free, what is chargeable, named contact.
  • Claims and complaints process — 8D readiness, named contact, response SLA.

A pack that meets this standard makes the procurement and QA work of the next eleven weeks materially easier — and demonstrably reduces the time a Q4 customer audit takes to clear.


What “PPWR-ready” looks like for cans, EOE and tinplate

A few practical observations specific to the formats most European food producers use.

Three-piece welded cans and two-piece DRD cans. Both formats are structurally recyclable as steel packaging. The recyclability question is rarely about the can body — it is about the coating system, label adhesives, and the EOE used. A supplier should be able to articulate the full assembled-can recyclability profile, not just the substrate.

Easy-open ends. Aluminum EOE and steel EOE have different recyclability profiles, different recycled-content characteristics, and different fees under EPR modulation schemes in some member states. Procurement should know which the current supplier delivers, and why. If the answer is “we deliver whatever you order” without further detail, the supplier conversation needs to go deeper.

Tinplate ETP (electrolytic tinplate) and TFS (tin-free steel, chrome-coated). ETP and TFS have different applications and different downstream compatibilities with coating systems. PPWR does not differentiate between them at the regulation level, but customer-audit questions in Q4 increasingly do. Procurement and operations should confirm which their SKUs use and that the supplier can document the choice.

Coatings. The bisphenols regulation (Regulation (EU) 2024/3190, in force since January 2025) is operationally adjacent to PPWR and will be examined together in customer audits. BPA-NI (non-intent) coatings are the production norm in EU canmaking, but procurement should hold a current per-coating declaration, not an industry-level assurance.

Secondary packaging. Trays, shrink wrap, palletisation. PPWR’s 50% empty-space ratio will apply to them from 1 January 2030 at the earliest. A supplier who has already optimised secondary packaging will be able to show pallet-pattern data and the rationale.


Common gaps that will surface in Q4 2026 audits

Based on conversations with European food producers conducting supplier reviews this spring, the recurring gaps cluster in a few areas:

  • Declarations are present but undated, or older than twenty-four months. A declaration with no issue date carries little audit weight. Refresh.
  • Recycled-content claims rest on industry averages, not supplier-specific data. “Steel is on average thirty per cent recycled in Europe” is not a defensible substrate claim. The supplier should be able to say what their substrate contains.
  • Recyclability assessments cite the substrate, not the assembled can. The auditor will ask about the full pack. The answer needs to address coatings, labels, EOE composition.
  • PPWR roadmap statements are aspirational, with no dates. A roadmap without dates is not a roadmap.
  • The QA contact at the supplier is not actually a QA person. Often the named contact is a sales account manager who routes QA questions to an internal team with delays. Ask for the technical-direct contact.
  • The supplier has no documented backup arrangement. A single point of supply for a critical SKU is a PPWR audit issue and a commercial issue both. The mitigation is a documented second-source supplier — qualified, sampled, and approved before the moment of disruption arrives.

Each of these gaps is fixable in the eleven weeks remaining, given the right supplier dialogue.


What needs to be in motion this week

If 12 August feels far away, here is what should be in motion by Friday 13 June at the latest:

  • The supplier documentation request, sent to every active and dormant metal-packaging supplier, using a common template, with a 24 June response deadline.
  • An internal PPWR working group convened — procurement, QA, sustainability, operations — with a weekly thirty-minute standing meeting through 12 August.
  • A tracking sheet established, with supplier responses logged centrally.
  • For SKUs identified as single-source risk, second-source supplier sampling initiated. Qualification of a new supplier on a format already supplied elsewhere typically takes six to ten weeks; starting in June puts a working alternative inside the audit window.
  • Customer-facing teams briefed: PPWR is a Q4 2026 audit topic, and the documentation work is in progress.

PPWR is not a moment that demands new marketing claims or compliance superlatives. It is a moment that rewards organised procurement work — and exposes the food producers and suppliers who have left documentation to drift.


Sources and primary references

Request Basket